Filter
Top Products
E111
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution A
Battery temperature
is elevated. The
camera will turn off.
The camera turns off automatically. Wait until
the battery has cooled before resuming use.
–
The camera will turn
off to prevent
overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write”
position.
–
This card cannot be
used.
An error occurred while accessing the memory
card.
• Use an approved memory card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly
inserted.
10,
F20
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for
use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies of any
images, make sure to select No and save the
copies to a computer or other medium before
formatting the memory card. Select Ye s and
press the k button to format the memory card.
10, F5
Out of memory. Delete images or insert a new memory card. 10, 23
Image cannot be
saved.
An error occurred while saving the image.
Insert a new memory card or format the
memory card.
10,
E107
The camera has run out of file numbers.
Insert a new memory card or format the
memory card.
10,
E107
Image cannot be
modified.
Check that the images can be edited.
E26,
F13
Cannot record movie.
A time-out error occurred while saving the
movie on the memory card.
Select a memory card with a faster write speed.
F20