Filter
Top Products
F14
Technical Notes and Index
Location Data Functions
Images to be
printed are not
displayed.
The memory card contains no images.
–
Cannot select
paper size with
the camera.
The camera cannot be used to select the paper size in
the following situations, even when printing from a
PictBridge-compatible printer. Use the printer to select
the paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
–
Problem Cause/Solution
A
Unable to
identify the
location or it
takes time to
identify the
location.
• The camera may not be able to identify the location
in some shooting environments. To use the location
data functions, use the camera as much as possible
in an open-air area.
• When positioning for the first time or when
positioning was unable to be performed for about
two hours, it takes a few minutes to obtain the
location data.
E40
E40
Unable to record
location data on
shot images.
When z or y is displayed on the shooting screen, the
location data is not recorded. Before shooting images,
check the location data reception.
59
Difference
between the
actual shooting
location and
recorded
location data.
The acquired location data may deviate in some
shooting environments. When there is a significant
difference in the signals from the positioning satellites,
there could be a deviation of up to several hundred
meters.
E40
The recorded
location name is
different from
the intended
one or is not
displayed.
The desired landmark name may not be registered, or a
different landmark name may be registered.
–
Problem Cause/Solution
A