Filter
Top Products
E43
Reference Section
B Notes About Log Recording
• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off during log
recording. When the battery power becomes exhausted, log recording ends.
• Even when the camera is turned off, log recording is continuously performed until
the preset time has elapsed if there is still time remaining for log recording.
• Log recording ends due to the operations below even when there is time
remaining for log recording.
- The battery is removed
- Record location data in Location data options is set to Off
- Reset all in the setup menu is performed
- The setting of the internal clock (time zone or date and time) is changed
- End log is selected in Create log of the location data options menu (E44)
• Log recording is paused during the operations below.
- During continuous shooting
- During movie recording
- When connected with a USB cable or HDMI cable
Log recording is resumed when the above operations are finished.
• The log data cannot be recorded when positioning cannot be performed at all
during log recording.
• After recording log data, save it to a memory card (E44). New logs cannot be
recorded if the log data remains in the camera.