Filter
Top Products
E49
Reference Section
Users of PictBridge-compatible printers can connect the camera directly to the
printer and print images without using a computer.
Connecting the Camera to a Printer
1 Turn on the printer.
2 Turn off the camera and connect it to the printer using the
USB cable.
• Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
3 The camera is automatically turned on.
• The PictBridge startup screen (1) is displayed in the camera monitor,
followed by the Print selection screen (2).
B If the PictBridge Startup Screen Is Not Displayed
When Auto is selected for Charge by computer (E108), it may be impossible
to print images with direct connection of the camera to some printers.
If the PictBridge startup screen is not displayed after the camera is turned on,
turn the camera off and disconnect the USB cable. Set Charge by computer
to Off and reconnect the camera to the printer.
Connecting the Camera to a Printer (Direct
Print)
No. 3215/11/2015 [ 32]
Print selection