Filter
Top Products
E65
Reference Section
Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
1 Place a white or gray reference object under the lighting
that will be used during shooting.
2 Use the multi selector HI to
select Preset manual, and press
the k button.
• The lens extends to the zoom position for
measurement.
3 Select Measure.
• To apply the last measured value, select
Cancel.
4 Frame the white or gray reference
object in the measuring window,
and press the k button to
measure the value.
• The shutter is released and measurement is
complete (no image is saved).
B Notes About Preset Manual
A white balance value for flash lighting cannot be measured with Preset manual.
When shooting using the flash, set White balance to Auto (normal), Auto (warm
lighting) or Flash.
Auto (normal)
Auto (normal)
Auto (warm lighting)
Auto (warm lighting)
Daylight
Daylight
Incandescent
Incandescent
Fluorescent
Fluorescent
Cloudy
Cloudy
Preset manual
White balance
Cancel
Measure
Preset manual
Cancel
Measure
Preset manual
Measuring window