Filter
Top Products
E113
Reference Section
Cannot save to card.
A memory card is not inserted.
Insert a memory card.
10
The maximum number of log data events that
can be saved per day is 36.
–
Log has not been obtained. E43
The maximum number of log data events that
can be saved in one memory card is 100.
Replace the memory card with a new one or
delete log data that is no longer required from
the memory card.
10,
E44
No access.
The camera could not receive the
communication signal from the smart device.
Wirelessly connect the camera and smart device
again.
• Press the q button.
• Touch an NFC-compatible smart device to
the camera.
• Select Connect to smart device in the Wi-Fi
options menu.
E45,
E92
Could not connect.
The camera failed to establish the connection
while receiving the communication signals from
the smart device. Select a different channel for
Channel in Options in the Wi-Fi options menu
and establish the wireless connection again.
E45,
E92
Wi-Fi connection
terminated.
The Wi-Fi connection is terminated in the
following situations:
• Poor connectivity.
• The battery level is low.
• A cable or a memory card is inserted or
removed.
Use a fully charged battery, disconnect the TV,
computer or printer and establish the wireless
connection again.
E45,
E92
Lens error. Try again
after turning the
camera off and on.
If the error persists, contact your retailer or
Nikon-authorized service representative.
F7
Communications
error
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
E49
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
F7
Display Cause/Solution A