Nikon SB-16 Camera Flash User Manual


 
-PHOTOGRAPHIC
TECHNIQUES-confinued-----
Manual
multiple
flash
photography
If the secondary flash unit
is
either a Nikon Speedlight
S8-11,
S8-12, S8-14, S8-15, S8-16 or S8-17, use either
the
SC-11
(approx. 25cm) or
SC-15
(approx. 1
m)
sync
cord
to
connect the flash units together via sync/multiple
flash terminal. With the S8-7E or S8-10,
use
the
SC-5
(approx. 15cm),
SC-7
(approx. 25cm) or
SC-6
(approx.
1
m).
All
these sync cords are available
as
optional ac-
cessories.
Note:
In
manual multiple flash operation, make sure to use both flash
units on manual.
In
the
TTL
or
non·
TTL
automatic shooting mode. the
correct exposure cannot be obtained. because light from each speedlight
affects the measurement.
62
Caution:
The
S8·
16
employs a speciallow·voltage triggering circuit to
prevent electrical shock and damage to the hot·shoe contact.
We
do not
recommend mixing Nikon Speedlights with flash units
of
other makers for
multiple flash photography, unless you use slave units for remote trigger·
ing. Otherwise. incorrect operation and/or damage to the unit may result.