Filter
Top Products
BASIC
OPERATION------------
1
Set
the
openl
closed
knob
• ®
on
the
flash
unit
coupler
to
the
OPEN
position.
2
Attach
the
flash
unit
.
coupler
to
the
flash
unit.
Position the flash unit and flash unit
coupler,
so
that the secondary flash
head
®
on
the flash unit and the sen-
sor
(J)
on
the flash unit coupler face
the same direction. Insert the posi-
tioning claw
® into the slot ®
on
the
flash unit.
Then, while applying pressure to the
open/closed knob, push the fl
ash
unit coupler into the flash unit until
it
clicks into place.
Note: If batteries have already been installed
in
the battery chamber. make su
re
the ON/O
FF
switch ®
is
at the "off" position
to
avoid acci-
dental firing.
7