Filter
Top Products
5
Load
the
batteries
into
.
the
holder.
Load four 1.5V
AA
-type penlight
alkaline-manganese cells or 1.
2V
rechargeable NiCd batteries into the
holder, making sure that the positive
and negative
(+
and
-)
terminals
match the diagrams
on
the holder.
Notes:
1)
Use
of
manganese batteries
is
not recom-
mended because their power is insufficient
for operating the S8-
16
at full capacity.
2)
Do not mix brands or types
of
batteries. Also,
avoid mixing new and old batteries since
proper performance will not be obtained.
6.
Replace
the
holder.
First, make sure the power switch
@ of the flash unit
is
at the "off"
positi
on
; then put the holder back
into the chamber, so that the slots at
both sides of the holder are aligned
with the guide rails inside the battery
chamber.
7.
Close
the
lid.
While applying pressure to the
battery holder with your finger, slide
the lid
as
far
as
it
will go until
it
clicks
into place.
9