Filter
Top Products
Overview of the EtherSpeedII Switch Modules
207344-B 1-5
The EtherSpeedII 100BASE-FX switch module (Figure 1-3) consists of a printed
circuit board with a metal module faceplate. The module includes captive
retaining screws and inserter/extractor levers on the top and bottom of the front
panel.
Figure 1-3. EtherSpeedII 100BASE-FX 16-Port Switch Module
Each switch module occupies one slot in a Centillion 50/100 chassis. In a
Centillion 100 chassis, you can install a maximum of either:
• Five EtherSpeedII switch modules and one master control processor
(MCP) switch module
• Four EtherSpeedII switch modules and two MCP switch modules
In a Centillion 50 chassis, you can install a maximum of two EtherSpeedII switch
modules and one MCP switch module.
Note: See Appendix B, “Cables and Connectors,” for more information about
wiring and pin assignments.
9722FA
Inserter/extractor
levers
Captive retaining
screws
LEDs
Backplane connector
Printed circuit
board
16 100BASE-FX ports (MT-RJ)