Filter
Top Products
Installing the EtherSpeedII Switch Modules
207344-B 3-3
To install and secure the module in the chassis:
1. Remove the filler panel.
Using the medium flat-tip screwdriver, loosen the two captive retaining
screws on the filler panel until they pop free of the chassis. Rotate the left and
right inserter/extractor levers away from the center of the filler panel to their
protruding positions and remove the filler panel (Figure 3-1
).
Figure 3-1. Removing the Filler Panel
2.
Make sure the module inserter/extractor levers are protruding forward
(Figure 3-2
).
Figure 3-2. Inserter/Extractor Levers Ready for Installation
6463
6464