Filter
Top Products
121
Troubleshooting
Miscellaneous
9
Pictures you have taken do not appear on the monitor.
Possible cause Corrective action Ref. Page
The power is off. With the lens barrier closed, press to turn
the monitor on.
P.26
The camera is in the
shooting mode.
Press quickly twice, or close the lens
barrier and then press to switch to the
playback mode.
P.26, 84
There are no pictures on
the card.
NO PICTURE appears on the monitor. Record
pictures.
—
There is a problem with
the card.
Refer to the “Error codes”. P.117
The camera is connected
to a TV.
The monitor does not function when the video
cable is connected to the camera.
P.89
The date recorded with the image data is wrong.
Possible cause Corrective action Ref. Page
The date/time is not set. Set the date/time. The clock adjustment is not
factory-preset.
P.30
The battery is exhausted. When the battery runs down, the date/time
setting is canceled or becomes inaccurate.
Insert a charged battery and reset the date and
time.
P.18, 30
The camera has been left
with the battery removed.
If the camera is left for about a day with the
battery removed, the date/time setting is
canceled. Set the date/time again.
P.30
The settings are returned to the factory default settings when the camera is turned off.
Possible cause Corrective action Ref. Page
All Reset is set to ON. Select the SETUP tab in the mode menu and
set All Reset to OFF.
P.101
Remove the battery just
after turning the camera
off.
Removing the battery just after turning the
camera off may cause the settings to return to
the factory default settings.
Wait a few seconds before removing the
battery.
—