Filter
Top Products
55
If correct focus cannot be obtained
Shooting basics
4
5
Press the shutter button fully.
TIPS
The green lamp blinks.
Æ You are too close to the subject. Take the picture at least 50 cm
away from the subject. When the distance from the camera to the
subject is less than 50 cm/1.6 ft, select the macro mode.
“Macro mode shooting” (P.65)
Æ Depending on the subject, the focus may not be locked.
“Subjects that are difficult to focus on” (P.55)
Subjects that are difficult to focus on
Under certain types of conditions, the auto focus may not work properly. If this
happens, focus on an object with high contrast at the same distance as the
intended subject (focus lock), recompose your shot and then take the picture.
If the subject has no vertical lines, hold the camera vertically and focus the
camera using the focus lock function by pressing the shutter button halfway,
then return the camera to the horizontal position while keeping the button
pressed halfway and take the picture.
Shutter button
The green lamp
blinks.
The subject cannot be
brought into focus.
Subject with low
contrast
Subject with an
extremely bright area in
the center of the frame
Subject without
vertical lines
Subjects at different
distances
Fast-moving subject The subject to be
focused on is not in the
center of the frame
The green lamp lights,
but the subject cannot
be brought into focus.