Filter
Top Products
18
1
Getting started
Loading the battery
Use an Olympus LI-10B lithium ion battery.
1
Make sure that:
2
Slide the battery compartment
cover in the direction of
(the
direction indicated by the
mark on the cover), and lift it up in
the direction of
.
3
Insert the battery in the direction
shown in the illustration.
4
Close the battery compartment
cover so that it pushes the battery
down inside
. While pressing the
mark, slide the cover in the
direction of
.
• If the battery compartment cover seems
hard to close, do not force it. With the
battery compartment cover shut, press the
mark firmly and push
in the direction shown in the illustration.
• If the camera is left for about a day with the battery removed, the
date and time settings will revert to the factory default settings.
• Be sure to check the date and time after changing the battery.
Important
The lens barrier
is closed.
The lamp on the right
of the viewfinder is off.
The monitor is
off.
Battery compartment cover
Connector terminals
Note