Filter
Top Products
40
EN
Basic photography/frequently-used options
1
Displaying information during playback
The INFO button can be used to choose the information displayed during playback.
Overall display (P. 32)
Simplified display (P. 32)
Highlight & Shadow display*Light box display
*
Histogram display
*
Image only
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
2012.05.01 12:30 15
100-0015
4
:
3
L
N
×10×10
F5.6F5.6
±0.0±0.0
G±10G±10A±10A±10
AdobeAdobe
NaturalNatural
ISO 400ISO 400
250250
+2.0+2.0 45mm45mm
1/84032×3024
×10×10
4
:
3
L
N
2012.05.01 12:30 15
100-0015
WB
AUTO
P
1615
15
Shadow
Highlight
2012.05.01 12:30 15
×10×10
INFOINFO
* Displayed when [On] is selected for [G/Info Settings] > [q Info]. (P. 87)
Histogram display
Display a histogram showing the distribution of brightness in the image. The horizontal axis
gives the brightness, the vertical axis the number of pixels of each brightness in the image.
Areas above the upper limit at shooting are displayed in red, those below the lower limit in
blue, and the area metered using spot metering in green.
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. [Histogram Settings] (P. 88)
Light box display
Compare two images side-by-side. Press Q to select the image on the opposite side of the
display.
• The base image is displayed on the right. Use HI or sub dial to highlight an image and
press Q to move it to the left. The image to be compared to the image on the left can
be selected on the right. To choose a different base image, highlight the right frame and
press Q.
• Press Fn1 to zoom the images in. Rotate the main dial to choose a zoom ratio. When
images are zoomed in, use FGHI to scroll and the sub dial to select the image.
2x
2x
53 54
2x
Fn1 Fn1 Fn1