Filter
Top Products
94
EN
Customizing camera settings
10
R REC
Press the button to record a movie. If movie recording is not
currently assigned to a button, movies can be recorded by
rotating the mode dial to n and pressing the shutter button.
Preview (electronic) Aperture is stopped down to the selected value while the
button is pressed (P. 58).
P
Choose the AF target.
P Home
Pressing the button selects the AF target position saved
with [P Set Home] (P. 86). The home AF target position is
indicated by a p icon. Press the button again to return to
AF target mode. If the camera is turned off when the home
position is selected, the home position will be reset.
k
The camera measures white balance when the button is
pressed (P. 51).
MF Press the button to select manual focus mode. Press the
button again to restore the previously selected AF mode.
RAW K
Press the button to toggle between JPEG and RAW+JPEG
record modes.
Test Picture Pictures taken while the button is pressed are displayed in the
monitor but are not recorded to the memory card.
Myset1 – Myset4 Pictures shot while the button is pressed will be recorded at
the settings selected for [Reset/Myset] (P. 42).
I/H The button can be used to choose between I and H while
the underwater case is attached. Press and hold the button
to return to the previous mode. If this option is selected, the
FL-LM2 will fire even when not raised.
Live Guide Press the button to display live guides.
b (Digital Tele-converter)
Press the button to turn digital zoom on or off.
a (Magnify)
Press the button once to display the zoom frame, again to
zoom in. Keep the button pressed to cancel zoom.
AF Stop Stop autofocus.
j/Y
Choose a sequential shooting or self timer option.
#
Choose a flash mode.
Off No function is assigned to the button.
n Function
The default functions for F and H as assigned by the [Direct Function] option are [F]
and [P], respectively.