Filter
Top Products
11
3 Press PUSH to close the cassette holder.
The holder automatically goes into position
when you close it correctly.
While pressing the lock release, move the POWER
switch to ON.
The CAMERA lamp lights red (camera mode) and
the camera is now in the shooting standby mode.
1 Look at your subject through the viewfinder.
2 Press the START/STOP button on the POWER
switch to start shooting.
Press START/STOP again to return the camera
to the shooting standby mode.
• Do not try to insert or eject the tape by just
holding the cassette cover.
• Insert and remove cassette tapes after putting
the camera-recorder down on a stable, flat
surface or hold it with both hands to keep it
stable.
• Do not force the cassette holder while it is
moving. Trying to do so could damage the
camera.
• Close the cassette cover only after the cassette
holder is completely in position. Trying to close
the cover while the cassette holder is moving
could damage the camera.
Turn on the camera
P
U
S
H
PUSH
CAMERA
VCR
POWER
ON
OFF
Lock release
Start shooting
POWER
ON
OFF
Viewfinder
Before use