Panasonic AG-HPG20E Camera Accessories User Manual


 
List of setting menus (continued)
The underlined settings are the factory mode settings.
102
AV OUT SETUP screen (continued)
Item Description of settings
CC(F1) BLANK Only when 59.94 Hz has been set
This is used to make ON/OFF setting of the closed caption signal in the first field
output from SD-SDI output and VIDEO output.
BLANK:
Forced blanking
THRU:
Output
<Note>
In recording/recording standby status, the closed caption signals superimposed onto
the input signals are output.
CC(F2) BLANK
Only when 59.94 Hz has been set
This is used to make ON/OFF setting of the closed caption signal in the second field
output from SD-SDI output and VIDEO output.
BLANK:
Forced blanking
THRU:
Output
<Note>
In recording/recording standby status, the closed caption signals superimposed onto
the input signals are output.