Filter
Top Products
42
Clip management (continued)
Copying clips
Clips can be copied onto the P2 card in the other P2 card slot.
While clips are being copied, do not turn off the power or eject the card. Otherwise, defective clips will be
produced. If defective clips are produced, delete them, and copy the original clips again.
Copy incomplete clips after having connected them.
•
•
1 Display the thumbnail display screen.
2 Select the clip to be copied.
3 Press [MENU/MODE CHK].
4 Using , and , select “OPERATION”
– “COPY” – “SLOT n” (where “n” is the
number of the P2 card slot into which the
copy destination P2 card was inserted), and
press .
5 Select “YES”, and press .
Clip copying now starts.
To stop the copying process at any time, press
and select [YES] to cancel the copying. The
partially copied clip at the copy destination will
be deleted.
If there is a clip with the same GLOBAL CLIP ID--
one which, for instance, was previously copied to
the copy destination--“OVER WRITE” will appear.
To overwrite the existing clip, select “YES” or to
cancel the overwriting, select “NO”, and press .
(When you copy some portion of a clip which has
been recorded on a multiple number of P2 cards,
“OVER WRITE” also appears when copying the
remaining portion of the clip.)
•
•
6 When the completion message has
appeared, press “OK” ( ).
Clips cannot be copied when any of the following
error messages are displayed.
“LACK OF REC CAPACITY!”
Clips will not be copied because there is not
enough space left on the destination P2 card.
“UNKNOWN CONTENTS FORMAT!”
Clips will not be copied because the selected
clips include defective clips.
“NO COPY TO SAME CARD!”
Clips will not be copied because an attempt is
being made to copy clips to the same card.
“TOO MANY CLIPS!”
Clips will not be copied because too many clips
have been selected.
You can extract and copy a portion or subset of
a clip. If you start copying while selecting a text
memo at the bottom of the text memo screen, the
block between the selected text memo position
and the next text memo is copied. If there is no
text memo after the selected text memo, the
block from the text memo position to the end of
the clip will be copied.
Clips displayed by the
X
defective clip indicator
cannot be copied.
It may not be possible to copy clips for which the
?
unknown clip indicator is displayed.
•
•
•
•
•
•
•