Filter
Top Products
108
Item
Display
mode
Description of settings
1394 UB REGEN
P2
TAPE
(MCR/
VCR)
Selects the user information used when recording the signals from equipment
connected to the 1394 terminal.
ON:
Records using the user information of the signal input through the 1394
terminal.
OFF:
Records using the user information set in UB MODE.
• If you select ON here, this has priority over the setting in UB MODE.
• The user information is recorded only when the signal contains the user
information.
• If there is no input to the 1394 terminal, the camera follows the UB MODE
settings.
UB MODE
P2
TAPE
(Camera)
(MCR/
VCR)
(DUB)
Set the content for user information.
USER: Records the information of user.
TIME: Records the time at recording.
DATE: Records the date at recording.
TCG: Records the values of the time code generator.
FRM. RATE: Records the frame rate information for frame conversion.
abcd
a:Checking information for user information
b:Frame sequence No.
• 0 to 4 are displayed in the 24P/24P (ADV) mode.
• F is displayed in the 60i/30P mode.
c:Frame rates
• Frame rate (60/30/24)
• I/P ID
• Conversion data
• Frame rate coeffi cient
d:Recording management data
• Frame update information
• REC START/STOP information
UB PRESET
P2
TAPE
(Camera)
(MCR/
VCR)
(DUB)
Sets the user information. Select USER in UB MODE.
1394 IN PRESET
P2
TAPE
(MCR/
VCR)
Synchronizes the internal TCG value with the TC of 1394 input when you press
the TC SET button.
ON: The synchronization mode is on.
OFF: The synchronization mode is off.
indicates the factory setting.
RECORDING SETUP screen (continued)
Setup menu list (continued)