Filter
Top Products
148
Maintenance and Inspections : Warning System
The following error codes are displayed in the display window if an error occurs in the camera:
Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 145) for countermeasures.
Error Codes
Code No. Description Type of warnings
E-11 Video initialisation error 1. System Errors
E-27 Recording control error 1. System Errors
E-30 P2 card removal error 2.
Card removal error
E-34 LCD microcontroller error 1. System Errors
E-38 P2 streaming microcontroller error 1. System Errors
E-39
Abnormal initialization of the AVC-Intra codec board (optional AJ-YBX200G) 1. System Errors
E-3F Microprocessor error in the camera control circuit. 1. System Errors
E-40 Image sequence error (in case of 24P, 30P and 25P) 6.
Image Sequence Error (24P, 30P, 25P)
E-63 Something is wrong with the system control microprocessor. 1. System Errors
E-6F Reference signal error. 1. System Errors
00:00:00:11 Recording error on a P2 card 7. Recording Error
1394 Error Codes
Code No. Description Recording
Indication in display
window
1394 E-80
Signals being input to the DVCPRO/DV
connector are not 1
a speed transfer
signals in DV format.
Stops
The time code section of the
display window indicates the
appropriate error code that
blinks every two seconds.
1394 E-81
Signals being input to the DVCPRO/DV
connector are not 1
a speed transfer
signals in DVCPRO (25 Mbps) format.
Stops
1394 E-82
Signals being input to the DVCPRO/DV
connector are not 1
a speed transfer
signals in DVCPRO50 (50 Mbps) format.
Stops
1394 E-83
Incorrect signals are being input to the
DVCPRO/DV connector.
Stops
1394 E-84
Signals being input to the DVCPRO/DV
connector are not in DVCPRO or DV
format.
Stops
1394 E-85
Signals being input to the DVCPRO/DV
connector are not 1x speed transfer signals
in DVCPRO HD format.
Stops
1394 E-87
Incorrect audio signals are being input to
the DVCPRO/DV connector.
Continues with no sound.
1394 E-90
No signal is supplied to the DVCPRO/DV
connector.
While the recording mode continues, no
data is recorded on cards unless the
abnormal condition is corrected. If an
error has occurred before recording, then,
recording does not start.
1394 E-91
With the menu option REC MODE set to
DV, copy guard information signals for
recording prohibited data are being input to
the DVCPRO/DV connector.
Stops
1394 E-92
The DVCPRO/DV connector is not properly
connected. The viewfinder indicates the
message "1394 INITIAL ERROR."
No recording in 1394 input mode can be
performed.
AJ-HPX2000P(VQT1D27-1)E.book 148 ページ ２００７年７月３０日 月曜日 午後１時３１分