Filter
Top Products
58
Adjustments and Settings for Recording : Setting Time Data
The data set for the user bits are automatically saved and
retained even if the camera-recorder is turned off.
If video information to be recorded based on the frame rate
set through the menu option CAMERA MODE is recorded
in the user bits, it can be edited with editing tools (e.g. PC
editing software). In 1080i and SD mode, the frame rate
information for the user bits recorded in the VIDEO AUX
area are used. In 720P mode, the video information is also
recorded in the sub-code area because the frame rate
information for the user bits recorded in the sub-code area
is also used.
The frame rate and video pull-down menu are linked to the
time code and user bits as follows:
Frame rate: 24P Over 60i (2:3)
Frame rate: 24PA Over 60i (2:3:3:2)
Frame rate: 30P Over 60i (2:2)
25P Over 50i (2:2)
Retaining the user bits
Frame rate information recorded in user bits
Frame rate information
__
_
Media management information
z Updated frame information
/
Effective frame
z REC START/STOP mark
Camera shooting mode
60i: 600
60P: 608
30P: 308
24P: 248
24PA: 24C
50i: 502
50P: 50A
25P: 25A
Sequence No.
24P, 24PA: 0 to 4
In all other modes
: Fixed at F
Fixed value
Checking
information for the 6
digits at right.
For 1080i or 480i/576i
00 01 02 03 04 05 06
• • •
23 24 25 26 27 28 29
CoDeDoDeAoAeBo BeBoCeCoDeDoDeAoAeBoBeBoCeCoDeDoDeAoAeBoBe
• • •
0 1 2 3 4 0 1
• • •
3 4 0 1 2 3 4
10 10 01 01 00 10 10
• • •
01 00 10 10 01 01 00
Starting field for the
updated frame
Time code frame digit
Image
Sequence No.
Updated frame information
00 01 02 03 04 05 06
• • •
23 24 25 26 27 28 29
CoCeDoDeAoAeBo BeBoCeCoCeDoDeAoAeBoBeBoCeCoCeDoDeAoAeBoBe
• • •
0 1 2 3 4 0 1
• • •
3 4 0 1 2 3 4
10 10 01 00 10 10 10
• • •
00 10 10 10 01 00 10
Time code frame digit
Image
Sequence No.
Updated frame information
00 01 02
• • •
AoAeBoBeCoCe
• • •
10 10 10
• • •
Time code frame digit
Image
Updated frame information
AJ-HPX2000P(VQT1D27-1)E.book 58 ページ ２００７年７月３０日 月曜日 午後１時３１分