Filter
Top Products
72
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Information Item Indication Status
10. MODE CHECK
Indication Area
(STATUS:
Master gain,
USER SW GAIN)
LOW/MID/HIGH
–3 to 30
S.GAIN 30/36/42/48
DS.GAIN 6
:/10:/12:/
15
:/20:
Value set for the master gain
Example: LOW: 0
Gain value to which S.GAIN and DS.GAIN are assigned
(Cause of !LED
illumination: displayed
full-screen)
z Indications selected
through the menu option
!LED are marked with
[ ! ].
z Indications which may
activate the !LED are
marked with [ ].
GAIN (0 dB)
GAIN (–3 dB)
DS.GAIN
LINE MIX
SHUTTER
WHITE PRE.
EXTENDER
B.GAMMA
MATRIX
COLOR COR.
FILTER
AT W
Gain status
Gain status
DS. GAIN value
LINE MIX status (ON or OFF)
Shutter status
White balance status
Extender status (EX2 or OFF)
BLACK GAMMA status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
ATW status (ON or OFF)
(FUNCTION:
VIDEO OUT)
OUTPUT: MEM/CAM/OFF
TYPE: HD-SDI/SD-SDI/VBS
CHAR: ON/OFF
Position of OUTPUT SEL switch.
Setting for menu option VIDEO OUT switch.
Position of VIDEO OUT CHARACTER switch.
(FUNCTION:
MON OUT)
OUTPUT: MEM/CAM/OFF
SELECT: VBS/VF/Y
CHAR: ON/OFF
Position of OUTPUT SEL switch.
Signal mode set through the MONITOR OUT menu option.
The setting for menu option MONITOR OUT CHAR.
The options MONITOR OUT and MONITOR OUT CHAR can be found in
the OUTPUT SEL screen, which is accessible from the SYSTEM SETTING
page.
(FUNCTION:
P2CARD STATUS)
TOTAL
SLOT1/SLOT2/SLOT3/
SLOT4/SLOT5
OP-SLOT
Total remaining free space/capacities of the P2 cards loaded in P2 Card
Slots 1 - 5.
Remaining free space/capacity of each card. The numbers denote the P2
card slot numbers.
The card status is indicated as:
ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD/PROXY
For details of statuses, see [P2 CARD ACCESS LED and status of P2
cards] (page 30).
Indicates optional slot status.
The card status is indicated as:
PROXY/NO CARD/NOT SUPPORTED
(AUDIO: Enabling or
disabling the FRONT
AUDIO LEVEL
control)
CH1: ON/OFF
CH2: ON/OFF
If the FRONT AUDIO LEVEL control is in effect for Channel 1, then ON is
indicated. If not, OFF is indicated.
If the FRONT AUDIO LEVEL control is in effect for Channel 2, then ON is
indicated. If not, OFF is indicated.
(AUDIO: Phantom
power status for the
microphone)
FRONT: ON/OFF
REAR: ON/OFF
Phantom power status of the front microphone
Phantom power status of the rear microphone
For more information, see [MIC/AUDIO2] (page 182).
(AUDIO: Input signal
and level for each
channel)
FRONT/W.L./REAR
CH1/2/3/4
Input signal and level for each channel
AJ-HPX2000P(VQT1D27-1)E.book 72 ページ ２００７年７月３０日 月曜日 午後１時３１分