Filter
Top Products
166
Menu : Menu Description Tables
Note
The items indicated by are the setting items for PAINT
MENU SW(
) R/W in the <SD CARD R/W SELECT>
screen. The items without
are the setting items for
PAINT MENU LEVEL R/W.
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information.
The ____ in the Adjustable Range column indicates the
preset mode.
SKIN TONE DTL
Items/
Data Saved
Adjustable
Range
Remarks
SKIN TONE
DTL
OFF
A
B
AB
For selecting the skin color table for
enabling the skin tone detail.
The skin color table is provided in the
SKIN TONE TABLE item.
By enabling the skin tone detail, it is
possible to shoot human skin more
accurately.
SCUFR
SKIN TONE
ZEBRA VF
ON
OFF
For the setting to display the zebra
pattern in the skin tone area displayed in
the viewfinder screen.
The zebra pattern is displayed when this
item is turned “ON” and the <SKIN
TONE DTL> screen is opened.
The zebra pattern is displayed on area A
or B, which is selected in the SKIN
TONE TABLE item.
It is impossible to display both area A
and B at the same time.
SCUFR
SKIN TONE
TABLE
A
B
For selecting the skin color table for
subjects to which the skin tone table
applies.
SCUFR
SKIN TONE
GET
For fetching the color information of A or
B, which is selected in the SKIN TONE
TABLE item, near the center marker.
When this function is executed, data
from I CENTER to Q PHASE are fetched
automatically.
The fetched data will be the table data of
A or B, which is selected in the SKIN
TONE TABLE item.
It is impossible to obtain color
information of both A and B at the same
time.
–––––
SKIN DTL
CORING
0
:
5
:
7
For setting the effect level of the skin
tone detail.
SCUFR
Y MAX 000
:
190
:
255
For setting the maximum value of
brightness for enabling the skin tone.
SCUFR
Y MIN
000
:
010
:
255
For setting the minimum value of
brightness for enabling the skin tone.
SCUFR
I CENTER 000
:
035
:
255
For setting the center position on the I
axis (for setting an area that enables
skin tone.)
SCUFR
I WIDTH 000
:
055
:
255
For setting the area width for enabling
the skin tone on the I-axis of which the
center is the I CENTER.
SCUFR
Q WIDTH 00
:
10
:
90
For setting the area width for enabling
the skin tone on the Q-axis of which the
center is the I CENTER.
SCUFR
Q PHASE –180
:
+000
:
+179
For setting phases of the area for
enabling skin tone as setting the
standard to the Q-axis.
SCUFR
R-Y
B-Y
Q-WIDTH
I-WIDTH
Q-PHASE
I-CENTER
Y
Y- M A X
Y- M I N
0
–
direction
+ direction
= SKIN TONE AREA
AJ-HPX2000P(VQT1D27-1)E.book 166 ページ ２００７年７月３０日 月曜日 午後１時３１分