Filter
Top Products
110
Adjustments and Settings for Recording
: Cinematograph Settings
1 Display the MAIN MENU by pressing the MENU button
for over 3 seconds, then open the <INITIALIZE> screen
from the FILE page.
2 Select READ FACTORY DATA with the JOG dial button,
and press the JOG dial button.
3 The following screen is displayed, so move the arrow
(cursor) to “YES” by turning the JOG dial button, and
press the JOG dial button.
Data stored in the Factory setting area of the built-in
memory will be read in, and the setting is completed.
4 Press the MENU button to complete the menu
operation.
The following are the differences between the cinematograph setting and the normal factory settings.
Return Cinematograph Setting to Factory Setting
Difference Between Cinematograph Settings and Normal Settings
Menu settings
Page Menu screen Item Factory setting
Cinematograph
setting
SYSTEM SETTING SYSTEM MODE SYSTEM MODE 1080-59.94i 1080-23.98PsF
VFR OFF ON
OUTPUT SEL SIGNAL FORMAT 4:2:2 4:4:4
P-10LOG OFF ON
OUTPUT ITEM MENU ONLY STATUS
DOWNCON MODE SQUEEZE LT-BOX
HD SDI A · B OUT MARKER CENTER MARK 1 2
FRAME MARK OFF ON
FRAME SIG 4:3 VISTA
MONI OUT MARKER CENTER MARK 1 2
FRAME MARK OFF ON
FRAME SIG 4:3 VISTA
PAINT LOW SETTING MATRIX TABLE A OFF
MID SETTING MATRIX TABLE A OFF
HIGH SETTING MATRIX TABLE A OFF
CAMERA SETTING DETAIL ON OFF
VF VF DISPLAY STATUS MODE NORMAL FILM-REC
LOW LIGHT LVL 35% OFF
VF MARKER SAFETY MARK (A) 1 2
FRAME MARK (A) OFF ON
FRAME SIG (A) 4:3 VISTA
SAFETY MARK (B) 1 2
FRAME MARK (B) OFF ON
FRAME SIG (B) 4:3 VISTA
VF INDICATOR1 EXTENDER ON OFF
GAIN ON OFF
ZOOM LVL ON OFF
SYSTEM MODE OFF ON
VF INDICATOR3 BATTERY ON OFF
AUDIO LVL ON OFF
CAM OPERATION SHUTTER SPEED SYNCHRO SCAN2 ON OFF
SHUTTER SELECT POSITION4 SEL 120.0deg 90.0deg
POSITION5 SEL 90.0deg 45.0deg
POSITION6 SEL 45.0deg 1/60
USER SW USER2 SW VF GAM REC SW
MARKER SEL (USER3 SW) VF MARK VF GAM
AJ-HPX3700G-VQT1V68_eng.book 110 ページ ２００８年１０月１５日 水曜日 午後６時３８分