Filter
Top Products
200
Menu: Menu Description Tables
Note
Please refer to [Setting UMID Information] (page 74) for the
UMID information setting.
Items/
Data Saved
Adjustable
Range
Remarks
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to “EXT”, the
EXT value is recorded. If not,
USER value set by UB is
recorded.
TIME: Select local time (hours,
minutes, seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
TCG: TCG value enters UB.
FRM RATE:
Select camera shooting
information (frame rate, etc.).
For more information, see
[Frame rate information
recorded in user bits] (page 66).
REGEN:
Read out value stored in card
and record value continuously.
Note
When the unit operates in 24P, 24PA,
and Native mode, the “FRM RATE” is
fixed.
–CUF–
TCG SET HOLD ON
OFF
On/off switching for the feature that
always starts recording (when the power
is turned on again) the TCG value that
was set before the power is turned off.
–CUF–
FIRST REC TC PRESET
REGEN
For selecting whether the time code is
regenerated to the value on the P2 card
when first recording after switching on
the power, inserting the P2 card or
changing the P2 card that is the
recording target.
PRESET:
Use the unit’s internal time code.
REGEN:
For clips recorded on the
recording-target P2 card,
regenerate the time code as the
time code of the clip that has the
most recent date and time.
Notes
Set the date and time accurately. For
guidance on setting, see [Setting the
Internal Clock’s Date and Time]
(page 67).
During operation in either 24P or 24PA
mode, regeneration of the value of the
card recorded in drop-frame is not
permitted.
–CUF–
P.OFF LCD
DISPLAY
ON
OFF
For selecting whether to allow the time
code of the LCD monitor to be set and
the counter to be displayed when the
power is off.
ON: It is possible to set the time code
and display the counter when
the power is off.
OFF: Power-down LCD monitor while
camera power is turned off.
Setting and indication disabled.
–CUF–
TC OUT TCG
TCG/TCR
Select the time code to be output to the
time code output connector.
TCG: Always output time code
generator value.
TCG/TCR:
Output time code generator
value in recording mode, and
time code reader value in
playback mode.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
TC DISP SEL 30F
24F
Select the display format for the time
code frame digits. (For 1080-59.94i only)
For details, refer to [Recording time code
and user bits] (page 64).
30F: Display time code frame digits in
30 frames.
24F: Convert time code frame digits
into 24 frames for display.
–CUF–
TC VIDEO
SYNCHRO
0
1
2
3
For setting to correct the time code
according to the delay of video signals.
0: Do not correct.
1: To delay the time code to be
input according to the timing of
the video images.
2: To forward the time code to be
output according to the timing of
the video images.
3: To delay the time code to be
input and forward the time code
to be output, respectively,
according to the timing of the
video images.
For details, refer to [Externally Locking
the Time Code] (page 69).
–CUF–
REC REVIEW
REGEN
ON
OFF
For selecting whether the time code is
regenerated to the value on the P2 card
or not, when subsequent recording starts
after setting the RET SW item on the
<SW MODE> screen to “R.REVIEW”
and pressing the RET button on the lens
or the user button on the unit on which
the RET SW function is assigned.
ON: The time code is regenerated.
OFF: The time code is not
regenerated.
–CUF–
UMID SET/INFO
Items/
Data Saved
Adjustable
Range
Remarks
COUNTRY NO-INFO
Input the user’s country. “NO-INFO” is
displayed until the input completes.
–CUF–
ORGANIZATION NO-INFO
Input the user’s organization or company
name. “NO-INFO” is displayed until the
input completes.
–CUF–
USER NO-INFO
Input the user name. “NO-INFO” is
displayed until the input completes.
–CUF–
DEVICE NODE
Indicate the product ID number.
–––––
AJ-HPX3700G-VQT1V68_eng.book 200 ページ ２００８年１０月１５日 水曜日 午後６時３８分