Filter
Top Products
Recording and Playback
31
Recording and Playback: P2 Cards
Recording and Playback
Note
When using the unit for the first time, be sure to set the time
data beforehand. On how the time data is set, see [Setting
Time Data] (page 63).
1 Turn on the POWER switch.
a. POWER: [ON]
2 While pressing down the slide lock button, slide the
slide-out door to the left.
The door opens.
b. Slide lock button
c. Slide-out door
3 Insert a P2 card into the P2 card slot until the eject
button pops up.
d. Eject button
e. The card must be inserted with the logo right way up.
4 Tilt up the popped-up eject button.
f. P2 card access LED
5 The P2 card access LED indicates the status of P2 card
in the slot.
For how the P2 card status is indicated, see [P2 card
access LED and status of P2 cards] (page 32).
6 Close the slide-out door.
Note
Do not leave the slide-out door open when moving unit.
P2 Cards
Inserting P2 Cards
a
b
c
d
e
f
AJ-HPX3700G-VQT1V68_eng.book 31 ページ ２００８年１０月１５日 水曜日 午後６時３８分