Filter
Top Products
95
Adjustments and Settings for Recording
: Handling data
Adjustments and Settings for Recording
1 Navigate the menu to the <SD CARD READ/WRITE>
screen.
2 Turn the jog dial button to move the arrow (cursor) to the
menu option R.SELECT. Then, press the dial button.
3 Turn the jog dial button to select a desired number (1 -
8). Then, press the dial button.
4 Turn the jog dial button to move the arrow (cursor) to the
option READ.
5 Press the jog dial button to display the following
message:
6 Turn the jog dial button to move the arrow (cursor) to
YES. Then, press the dial button.
When the data has been read, the following message
appears:
The data will not be read if any of the following messages
appears when the jog dial button is pressed:
7 To exit the menu, press the MENU button.
The settings menu will be replaced by status indications
for the unit.
To read data on an SD memory card
To select a file number
To read data on a selected file
Error message Remedy
READ NG
NO CARD
(No SD memory card inserted.)
Insert an SD memory card.
READ NG
FORMAT ERROR
(SD memory card not properly
formatted.)
The card has not been
formatted using the unit.
Replace the card.
READ NG
NO FILE
(No file found.)
Write file data.
READ NG
ERROR
(SD memory card not
readable.)
Only data written with the unit is
readable.
READ NG
CANNOT ACCESS
(SD memory card not
accessible.)
Example: The SD memory card
is not accessible because it is
being played back.
After the operation in process,
read data.
AJ-HPX3700G-VQT1V68_eng.book 95 ページ ２００８年１０月１５日 水曜日 午後６時３８分