Filter
Top Products
Indoor Pan/Tilt Head AW-PH400
AW-PH400
13
Installation (Be sure to ask your dealer to install the unit.)
3Mounting the tally lamp
Connect the cable connector which is taped to the top of the pan/tilt head to the tally lamp connector.
Mount the tally lamp on the top of the pan/tilt head using the two screws provided.
Mount the lamp while paying attention to the wire.
If the tally lamp is not going to be used, insert the cable which is stuck to the top of the pan/tilt head inside the pan/tilt head,
and attach the blank panel for the tally lamp using the two screws provided.
≥ Tighten up the screws securely to ensure that they will not come loose during use.
Tally lamp
Blank panel
Taped
Tally lamp cable connector