Filter
Top Products
Roll Unit AW-RL400
46
Installation
❈ Be absolutely sure to use a screwdriver or other tool to tighten the two camera mounting screws so that the camera
mounting plate is secured firmly.
4 Separate the camera mounting plate, which was removed in step 3, into its two
sub plates.
≥ Separate the camera mounting plate into sub plate (A) and sub plate (B) by
loosening the clamping screw.
Clamping screw
5 Follow the steps below to mount the camera mounting sub plates, which were separated in step 4, onto the camera body.
When the AW-E750, AW-E650 or AW-E350 is used as the camera
(1) Remove the screw attached to camera mounting sub plate (A), and use it to mount camera mounting sub plate (B) onto
the tripod mounting seat.
(2) Mount camera mounting sub plate (A) onto camera mounting sub plate (B).
When the AW-E655 is used as the camera
(1) Mount camera mounting sub plate (A) onto the tripod mounting seat using the two camera mounting screws.