Filter
Top Products
Pan/Tilt Control Panel AW-RP400
34
How to change the position of the connector panel
The position of the connector panel can be changed from the rear panel to the bottom panel.
1 Remove the five bottom panel screws, and remove the
blank panel.
2 Remove the five rear panel screws, and remove the
connector panel.
5 Secure the connector panel to the bottom panel using the
screws.
3 Secure the blank panel to the rear panel using the
screws.
4 Remove the two rubber feet from the blank panel.
Screws!5 (bottom panel)
Screws!5
(rear panel)
Screws!5 (bottom panel)
Screws!5
(rear panel)
Remove the blank
panel.
Remove the
connector panel.
Remove the two
rubber feet.
Connector panel
Blank panel
❈ Before changing the position, turn off the power.