Filter
Top Products
Operating Instructions
118
3.4 FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button on the side.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera.
• Press the FACTORY DEFAULT RESET button for 1 second when the camera
is on.
• The indicator blinks orange, and then turns off for 5 seconds.
• Do not turn off the camera until the indicator lights green.
Notes
• The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 60). Set it again.
• See page 119—page 126 for default settings.
• All buffered images on the internal memory are deleted when resetting the
camera to factory default. The buffered images on the SD memory card
are not deleted.
• The reset operation takes about 1 minute.
FACTORY DEFAULT RESET Button
(Press the button with a pointed object.)