Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 55
• Set up the IPsec policy as the following.
9. Access the camera (see page 11).
• If you can access the camera, the IPsec setup is complete.
Notes
• In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see 2.9 IPsec in the
Troubleshooting section of the Installation/Troubleshooting.
• See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec
features.
Items Settings
Protocol ANY
Source Network Network address and subnet mask on the LAN side of the
VPN router
Source IP address A global address on the WAN side of the VPN router
Destination Network A global address of the camera
Destination IP address A global address of the camera