Filter
Top Products
Operating Instructions
18
1.2.1 Auto Centering the Image (Click to Center)
Using your mouse, click any portion of the camera image. As long as it is within the
pan/tilt range of the camera, the image will automatically move to place the
selected point in the center of the screen.
1. Move the cursor to the desired point.
2. Click it.
• The clicked point is centered.
• See page 21 for the pan/tilt operation.
Notes
• When End Display appears on the operation bar, Click to Center does not
work beyond the pan/tilt end (see page 20).
• The clicked position may slightly miss the center depending on the lens
direction.
• If Click to Center is not premitted on the General User page (see page 72),
Click to Center does not work.
Cursor