Filter
Top Products
Operating Instructions
54
7. Click [Restart].
8. Set up your VPN router as shown below.
• To use tunnel mode, you need to set up your VPN router.
Setting Description
IPsec • Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
Encoding strength • Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
IKE Items Settings
Phase 1 Authentication
Method
Pre-shared Key Method
Mode Main mode
*1
*1
The camera does not support aggressive mode.
Diffie-Hellman
MODP Group
1, 2
Cipher Algorithm DES-CBC, 3DES-CBC, AES-CBC (128,
192, 256 bits)
Message-Digest
Algorithm
MD5, SHA-1
Lifetime 28800 s (Byte setting is not available.)
Phase 2 Mode Quick mode
PFS Off, D-H Group 1, D-H Group 2
Cipher Algorithm DES-CBC, 3DES-CBC, AES-CBC (128,
192, 256 bits), NULL
Message-Digest
Algorithm
HMAC-MD5-96, HMAC-SHA-1-96
Lifetime 28800 s (Byte setting is not available.)