Filter
Top Products
Operating Instructions
26
1.3 Listening to Camera Audio—Talking to the
Camera
The audio feature does not work in IPv6. Use the audio feature in IPv4 connection.
1. Access the camera (see page 11).
• The Top page is displayed.
2. Click the [Single] tab at the top of the page.
3. The audio control bar is displayed at the top of the screen. Listening or Talking
is selected using the 2 icons. For general users, the feature must be enabled,
otherwise it will not be displayed.
Audio Feature
Notes
• Talk button and Listen button cannot be used simultaneously. Talk feature is
stopped during listening. Talk feature can be used only for a user. Listen
feature can be used for maximum 10 users. If the audio is interrupted, reduce
the max. bandwidth (see page 38 and page 42). In this case, the number of
users for listening are reduced.
Talk Button
Listen Button
Adjustment Bar
(Volume adjustment only for listening)
: You can listen to the audio
around the camera.
Clicking the button
temporarily stops the
audio.
: You can talk from the
camera using the PC's
microphone. Clicking the
button stops temporarily
stops the audio.
: The audio is stopped.
Clicking the button again
starts the Talk feature.
This slider adjusts the volume. To the right side, the
volume is larger. To the left side, the volume is smaller.
: The audio is stopped.