Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 15
1.2 Viewing Single Camera page
1. Access the camera (see page 11).
• The Top page is displayed.
2. Click the [Single] tab at the top of the page.
• When Security Warning window is displayed, click [Yes] (see page 16).
• When Warning - Security window is displayed, click [Always] (see page
17).
3. Close the web browser.
Notes
• Refresh interval is [Motion] by default. You can change it on the operation
bar (see page 20).
• Refresh interval may change depending on the network condition, PC
performance and what object you view. SD memory recording or IPsec will
also slow refresh interval.
• When displaying video (Motion JPEG), the camera allows up to 30
simultaneous accesses. When trying more than 30 accesses, the 31st
user will see a gray screen. (Maximum 30 accesses for a Buffered Image
page too.)
• When the pan/tilt reaches the end of lower right or lower left, a part of the
camera body may be displayed. This is not a problem.
• To reduce the data traffic, the video can be automatically changed to
refreshing still images on the General User page (see page 72).
• To display the Single Camera page directly, add it to the [Favorites] on the
web browser.
• When you view a dark image, enable the color night view mode on the
Camera Setup page (see page 62). The image will be brighter, but the
refresh interval may slow down and image quality may decrease.
Talk Button
(see page 26)
Capture Image
Button
(see page 19)
Operation Bar
(see page 20)
Refresh Interval
(see page 20)
Listen Button
and
Adjustment
Bar
(see page 26)
Click to Center
(see page 18 )
Camera Image