Filter
Top Products
Operating Instructions
64
3. Click [Save] when finished.
• New settings are saved. If the home position is changed, the camera turns
to the home position.
• When finished, "Success!" is displayed.
4. Click [Go to Camera page].
• The Camera page is displayed.
Tilt Range
*1
Select from the following options.
• Minimum — Current settings, -45—+20
• Home Position
*2
— Current settings, -45—+20
• Maximum — Current settings, -45—+20
• The values must be selected as minimum home
position maximum.
Note
If you wrongly set the range, your privacy may be seen.
Check the range after the setup.
Return to
Specified
Position
• If the camera is not operated during the specified period,
the camera turns to the specified position.
Note
If you did not set any presets, the camera cannot turn to
the preset position.
Color Night
View
• In the color night view mode, the camera image becomes
brighter in a low illuminance. The camera image returns
normal operation in a bright location.
• If you enable the color night view mode, refresh interval
may slow down.
Note
In the color night view mode, the image may have white or
colored circles around the object. This is not a problem,
since it is a CCD sensor characteristic.
*1
See page 65 for details about pan/tilt range settings.
*2
These home position settings are displayed as you set on page 22.
Setting Description