Filter
Top Products
Operating Instructions
20
1.2.3 Using Operation Bar
Note
When the camera image is not displayed correctly, click [Refresh] at the tool
bar on the web browser. The image will be refreshed.
End Display
and Preset
Display:
When the pan/tilt has reached the end (Left End,
Right End, Up End and Down End), End Display
appears. When clicking a preset button, the preset
name appears.
Pan/Tilt
Scan:
Moves the lens throughout the horizontal ( ) or
vertical ( ) range, and returns to the original
position.
Pan/Tilt/
Home
Position:
Controls lens direction.
Pan ( : Left, : Right), Tilt ( : Up,
: Down) and Home Position ( : Center)
Preset
Button:
Applies the camera direction to a preset position.
You can preset 8 positions (see page 22—page
25).
Alarm
Position:
When the External I/O detects a signal, the camera
can be set up to turn to this position. Only an
administrator can operate it (see page 22).
Brightness: Changes brightness in nine steps including [STD]
(Standard). Clicking [-] or [+] changes the image
brightness.
Output
Control:
Controls output signals of the External I/O.
Refresh
Interval:
Sets a refresh interval. (Motion—60-second
interval)
Resolution: Selects [640 x 480] or [320 x 240] (default) pixels.
Image
Quality:
Selects the image quality.
• [Favor Clarity] optimizes the image for good
clarity.
• [Standard] keeps the standard quality. (default)
• [Favor Motion] optimizes the image for motion
display.