Filter
Top Products
Operating Instructions
106
5. Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts
after the camera turns to the Home Position, registered Preset No.1–20 or
Alarm No.1–2.
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
6. Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Lens Position
When Triggered
• Set [Move to alarm position] to move the lens to the Home
Position, alarm position (see page 34) or Preset 1–20
when the alarm signal is detected.
Setting Description
Image
Resolution
• Select image resolution (640 x 480, 320 x 240 (default) or
160 x 120 pixels) to buffer or transfer.