Filter
Top Products
Operating Instructions
34
1.2.5 Setting Home Position/Alarm Position/Preset
Position
Registering Home Position/Alarm Position
A home position or 2 alarm positions can be registered. When restarted, the
camera takes a home position. The alarm position is one that the camera turn to
when detecting alarms or motions. If the Lens Position When Triggered setting is
set (see page
106 or page 116), the camera takes an alarm position after the
External I/O detects a signal or the camera detects motions. See page 158 for the
External I/O.
Note
The digital zoom value will not be saved.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click or select the home position or the
alarm position.
4. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Home Position,
Alarm Position
and Preset
Position
Pan/Tilt
Program
Home
Position