Filter
Top Products
Operating Instructions
67
4. Click [Save] when finished.
• New settings are saved.
5. Click [Cancel].
• The IPsec page is displayed.
6. Check [Use] in the IPsec column, check encoding strength, and click [Save].
Setting Description
Status • Check the box to use this encryption method.
Pre-Shared Key • It is the key to use in the authentication of communications.
Enter the same pre-shared key as your VPN router.
• Enter ASCII characters for the host name (see page 183).
But [Space], ["], ['], [&], [<] and [>] are not available.
Note
If the pre-shared key leaks to a third party, it may lead to illegal
access, private information leak or interference. To protect your
security and privacy, pay attention to the following points.
• Make it known only to the specified people.
• Set it as many characters as possible.
• Change the password regularly.
Network address • Enter the destination network address.
• Enter "IP address/Prefix length" in the data field.
Router address • Enter the WAN IP address of the VPN router on a
destination network.
Note
• IPv6 link-local address is not available.
• The camera can be accessed only from the PCs under
the VPN router. Other PCs cannot access the camera.