Filter
Top Products
Operating Instructions
121
Setting Description
Server IP
Address or
Host Name
*1
*1
But [Space], ["], ['], [&], [<] and [>] are not available.
• If you set the server IP address, set 4 digits (0—255) and 3
periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set IPv6 address.
Port No. • Enter a number (1—65535). Usually set to 21.
Login ID
*2
*2
But ["] is not available.
• If your ISP requires a login ID, set it (0—63 characters).
Password
*2
• If your ISP requires a password, set it (0—63 characters).
Login Timing • Select the login timing to an FTP server. If you set [One Time]
during 1-minute transfer, the camera logs in to the server only
once, and can reduce the time to log in or log out.
Upload File
Name
*1
• Set the file name to save on an FTP server. Enter 1—234
characters. Entering "\" creates directories for a file. (E.g.
NetworkCamera\image.jpg)
Overwrite
Setting
• Selecting [Overwrite File] saves and overwrites the image on
the server. Selecting [Save as New File with Time Stamp]
saves the image attaching time stamps on the file name, and
the images are not overwritten.
(E.g. image20050101093020500.jpg) Underlined numbers
are "9h30min20s500ms on January 1, 2005". The letter "s" is
inserted after the day when referring to a summer time zone.
Data
Transfe r
Method
• Select [Passive Mode] normally. If FTP does not work, select
[Active Mode] and check the operation.