Filter
Top Products
Operating Instructions
49
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
camera to the network (see page
51).
(2) Network (IPv6) Configures the IPv6 network settings to connect the
camera to the network (see page 56).
(3) IPsec Enables IPsec (Transport or Tunnel mode) (see page 60).
(4) UPnP Enables automatic port forwarding or shortcut to the
camera (see page
70).
(5) DynamicDNS Registers with the DynamicDNS service (see page 73).
(6) Date and Time Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page
78).
(7) Camera Sets camera name, white balance, pan/tilt range, return to
specified position and color night view settings (see page
81).
(8) Audio Sets output, volume, PC audio input timeout, input, camera
microphone sensitivity and mute during pan/tilt settings
(see page
86).
Account
(9) Administrator
*1
Sets authentication setting and administrator security (user
name and password) (see page
88).
(10) General User
*1
Sets general user security (user name and password) and
general user's access level (see page 92).
Buffer/Transfer
(11) Trigger Sets image buffer or transfer by timer or alarm or motion
detection. (See page 95, page 104 or page 115)
(12) Motion
Detection
Sets the threshold and the sensitivity (see page 128).
(13) Alarm Log Sets the information to notify the log by e-mail (see page
131).