Filter
Top Products
Operating Instructions
46
1.6 Viewing Still Images on Your Mobile Phone
You can view still images over the Internet from a compatible mobile phone.
Enter "
http://IP address (or URL):Port Number/Mobile
" on a mobile phone and press [OK].
• When the port number is set to 80 (default), it is not required.
• The camera must be allowed the Internet access for mobile phone access.
• When an authentication window is displayed, enter the administrator's or the
general user's user name and password.
• A still image is displayed. (Video [Motion JPEG] cannot be displayed.)
E.g.
http://202.208.167. :50000/Mobile
(or .viewnetcam.com:50000/Mobile)
Pressing 2, 4, 6 or 8 on the mobile phones allows
you to pan or tilt the camera in four directions:
Left, Up, Down or Right.
Pressing 5 will refresh the image.
160 x 120 resolution is displayed at the first
access. Pressing 0 switches the resolution to 320
x 240.
Executing [Home Position] moves the lens to the
home position.
Pressing 1, 3, 7 or 9 on the keypad allows you to
use the first four registered preset positions.
Registered presets 5—20 are available by
activating the link on the mobile phone page.
Displays up to 50 Logs in order of time, and only
when logging in as an administrator.
Go to the control page when clicking.
Displays the number of new logs.
Displays the date and time, the kind of signal and
sensor.
Go to the control page when clicking.