Filter
Top Products
Operating Instructions
132
Setting Description
A setup of operation • Alarm log operation can be set here.
Time • Set the date and time to send alarm logs via E-mail.
SMTP Server IP
Address or Host
Name
*1
*1
But [Space], ["], ['], [&], [<] and [>] are not available.
• If you set the server IP address, set 4 digits (0—255)
and 3 periods such as "192.168.0.253". But "0.0.0.0"
and "255.255.255.255" are not available. Or set a host
name (1—255 characters).
• An IPv6 address can be set.
Port No. • Enter a number (1—65535). Usually set to 25.
POP3 Server IP
Address or Host
Name
*1
• If you set the server IP address, set 4 digits (0—255)
and 3 periods such as "192.168.0.253". But "0.0.0.0"
and "255.255.255.255" are not available. Or set a host
name (1—255 characters).
• An IPv6 address can be set.
Port No. • Enter a number (1—65535). Usually set to 110.
Login ID
*2
*2
But ["] is not available.
• If your ISP requires a login ID to log in to a POP3
server, set it (0—63 characters).
Password
*2
• If your ISP requires a password to log in to a POP3
server, set it (0—63 characters).
Reply E-mail
Address
*2
• Set the sender's E-mail address. We recommend you
to set the administrator's E-mail address.
Destination E-mail
Address 1-3
*2
• Set the destination E-mail address (up to 3).
Subject • Enter a subject with ASCII characters (see page 183)
or characters in each language (0—44 characters for a
1-byte character and 0—22 characters for a 2-byte
character). But ["] is not available.