Filter
Top Products
Note
• When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/
mobile”
*1
in the address box of the browser. When using the DDNS function, access to “http://Host
name registered in the DDNS server: (colon) + port number/mobile”.
• When “HTTPS” is selected for “HTTPS” - “Connection” on the [Network] tab of the “Network” page,
enter as follows.
“https://IP address: (colon) + port number/mobile” or “https://Host name registered in the DDNS server:
(colon) + port number/mobile”
• When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the cellular phone in use, password entry may be required each time the
screen is switched.
• It is impossible to transmit/receive audio using a cellular phone.
• Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
“9 Low” for “Image quality setting” of “JPEG” (®page 47) may sometimes solve this problem.
• Depending on the cellular phone in use or its contract plan, it may be impossible to access.
*1
IP address is the global WAN IP address of the router that can be accessed via the Internet.
*2
Only displayed for users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.”.
(®page 94)
2.2 Monitor images on a mobile terminal
It is possible to connect to the camera using a mobile terminal and monitor images (MJPEG only) from the
camera on the screen of the mobile terminal. Images are automatically refreshed to display the latest image.
Operations such as pan/tilt/zoom can also be performed.
The compatible mobile terminals are shown as follows. (As of January, 2012)
– iPad, iPhone, iPod touch (iOS 4.2.1 or later)
– Android™ mobile terminals
Only JPEG images can be viewed from standard Android mobile terminal browsers.
For further information about compatible devices, refer to our website
(http://panasonic.net/pss/security/support/info.html).
IMPORTANT
• When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (®page 94)
Note
• To view the camera images from a mobile terminal, network settings needed in order to connect to the
Internet must be set in advance. (®page 104)
22 Operating Instructions
2 Monitor images on a cellular phone/mobile terminal