Panasonic DMC-ZS6 Digital Camera User Manual


 
® Card is not of SD standard.
*_When cards in capacities of 4 GB or more are used, only SDHC or SDXC memory cards are
supported.
_ Data read has failed.
--, Chock whether card has been inserted correctly (--,14).
_ Data write has failed.
--, Turn off power and remove card, before re-inserting and turning on power again.
_, Card may possibly be damaged.
®_Try with a different card.
_ A card that has been used in another camera to record an AVCHD motion picture in a different
broadcast system cannot be used to record AVCHD Lite motion pictures with this camera.
-_ Format the card with this camera. The data wil{ be deleted.
*_Using a card of SD speed 'Class 4'_or above is recommended for recording motion pictures in
[AVCHD Lite(GPS REC)]/[AVCHD Lite].
Using a card of SD speed 'Class 6'_or above is recommended for recording motion pictures in
'MOTION JPEG'.
The SD speed class is a speed rating for continuous writing.
*_If recording stops even when using the card above, the data writing speed is low. We recommend
backing up the data on the memory card and reformatting it (--_28).
® Motion picture recording may be automatically terminated with certain cards.
*_Folder numbers in use have reached 999.
-+ Save all necessary data to computer (or other device), and [FORMAT] (-_28).
Folder number is reset to 100 when performing [NO.RESET] (-*25).
_ AV cable is connected to camera.
--, To remove message immediately _ Press [MENU/SETI.
--, To change aspect ratio _ Change [TV ASPECT] (_26).
_ USB connection cable is only connected to camera.
-_ Message disappears when cable is also connected to another device.
AT
® Use a genuine Panasonic battery.
*_Battery cannot be recognized as terminal is dirty.
-_ Wipe any dirt away from the battery terminal.
® The battery level is low.
-_ Charge the battery before use. (--11)
_ GPS may not work in China or in the border regions of countries neighboring China. (Current as of
February 2010)
VOT2R20155