Filter
Top Products
VlERA Link (HDMI) is not working. F4L'4_
*_Is the HDMI mini cable (optional) connected correctly? (-_148)
--_ Check that the HDMI mini cable (optional) is fully inserted.
*_Is the camera's [VlERA Link] setting set to [ON]? (--_27)
--_ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television's remote control
(consult your television's operating instructions for details).
--_ Check the VlERA Link (HDMI) settings on the device you are connecting to.
--_ Turn the camera's power off and on again.
--_ Turn the 'VlERA Link control (HDMI device control)' setting on your television (VlERA) to 'off', and
then to 'on' again. (Consult your VlERA's operating instructions for details.)
Cannot send pictures to computer.
_,Not connected correctly (_141).
® Check whether computer has recognized camera.
*_Set [USB MODE] to [PC] (--_26).
Computer does not recognize card (only reads built-in memory).
® Disconnect USB connection cable and reconnect with card in place.
® Set mode dial to any except [_.
Computer does not recognize card. (When using an SDXC memory card)
--_ Check whether your computer is compatible with SDXC memory cards.
http:l/panasonic.netlavc/sdcardlinformationlSDXC.html
--_ A message prompting you to format the card may appear when you connect it. Do not format the
card.
--_ If the [ACCESS] indicator on the LCD monitor does not go off, turn off the camera's power before
disconnecting the USB connection cable.
I want to play computer pictures on my camera.
® Use the supplied software 'PHOTOfunSTUDIO' to copy pictures from computer to camera.
® To save to clipboard, use software to copy from computer to card, then copy to clipboard folder with
[COPY] (--_137)in [PLAYBACK] menu.
Cannot print when connecting to printer.
® Printer not compatible with PictBridge.
*_Set [USB MODE] to [PictBridge (PTP)] (_26).
Cannot get the date printing.
® Make date printing settings before printing.
--_ In shop: Make [PRINT SET] settings (--_134), and request printing 'with dates'.
--_ With printer: Make [PRINT SET] settings, and use a printer compatible with date printing.
--_ With supplied software: Select 'with dates' within print settings.
*_Use [TEXT STAMP] before printing (--_128).
Edges cut off pictures when printing.
® Release any trimming or edgeless printing settings on printer before printing.
(Consult printer operating manual.)
*_The pictures were recorded in _ aspect ratio.
--_ If printing in shop, check if 16:9 sizes can be printed.
VOT2R20161