Filter
Top Products
110
LSQT1011
With other products
With a printer (PictBridge)
6 Select the date print setting on [ DATE PRINT].
≥ If the printer is not capable of date printing, this setting is unavailable.
7 Select the paper size setting on [ PAPER SIZE].
≥ You cannot set paper sizes not supported on the printer.
8 Select the layout setting on [ PAGE LAYOUT].
≥ You cannot set page layouts not supported on the printer.
9 Select [ PRINT] # [YES] and press the joystick.
The pictures are printed.
≥ Exit PictBridge by disconnecting the USB cable (supplied) after the
pictures have been printed.
When you stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the
screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to
step 3.
≥ Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥ Check the settings for the paper size, quality of
print, etc. on the printer.
≥ The sides of pictures recorded when [ ]
(VDR-D300)/[ ] (VDR-D250) is set may be cut
at printing. Check before printing.
When using the printer with a trimming feature or
other feature which cuts out both edges of the
pictures, cancel the feature for printing. (Refer to the
operating instructions of the printer for details.)
≥ You may not be able to print still pictures recorded
with other products.
≥ When the unit is connected directly to the printer,
the DPOF settings cannot be used.
≥ Connect the printer directly to this unit. Do not use a
USB hub.
STANDARD: Size specific to the printer
4t5 INCH: L size
5t7 INCH: 2L size
4t6 INCH: Postcard size
A4: A4 size
STANDARD: Layout specific to the printer
: No frame print
: Frame print
2
1.7
D250&300(P_PC)eng.book 110 ページ ２００６年１月２０日 金曜日 午後２時３分